4. Load the stack of documents face down with the top of the pages pointing into
the feeder.
5. Verify that the paper guides are aligned with the edges of the stack by sliding the
paper feed guides in the automatic feeder tray.
Feeding Tips
To avoid occasional multi-feeds or paper jams, please fan your
documents and align the top edges before feeding them into the
scanner.
1. Hold both ends of the documents and fan them a few
times.
2. Rotate the documents by 90 degrees and fan them in the
same manner.
3. Align the edges of the documents in a step-like pattern
(see picture).
19 support@raven.com | 1-800-713-9009 | raven.com/support
To Next Page
Loading...
Need help?
General
