Maintenance
Your scanner is designed to be maintenance-free. However, constant care and
maintenance can keep your scanner working smoothly.
Cleaning the ADF
After using the scanner for a long period of time, the rollers and glass inside the scanner
may become contaminated with ink, toner particles or paper dust. It is necessary to
perform routine cleaning to ensure the optimum image quality and performance. As a
guideline, please clean the rollers and glass after first 4,000 to 5,000 scans and then
perform the cleaning on a weekly basis. Note that the guideline varies according to the
type of documents you are scanning.
Tip! If documents do not feed easily, if several documents feed at the same time or if
streaks appear on the scanned images, it is time to clean your scanner.
Cleaning Procedures
1. Soak a clean cloth with some isopropyl alcohol (95%).
2. Open the front door slightly to the left. Wipe the feeding rollers until the surfaces
are cleaned.
3. Close the scanner front cover. Your scanner is now ready for use.
28 support@raven.com | 1-800-713-9009 | raven.com/support
To Next Page
Loading...
Need help?
General
