EasyManua.ls Logo

ray VISION - Page 21

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RAY User Guide Getting Started with RAY
21
To select the number 3, place your finger on the screen and then slide it
diagonally upwards to the top, right of the screen and so on.
To select an *, 0 or #, slide your finger downwards. On the way, you should
hear RAY read out 7, 8 or 9 accordingly.
4 To dial the telephone number, slide your finger from the center of the screen
towards the number 6. When your finger reaches 6, RAY says 6. Hold your
finger in that place on the screen and after a moment RAY says the word Dial.
Then, lift your finger off the screen and RAY dials the number.
5 To terminate a call in progress short press the ON/OFF key.
Other Dialer Options
Other Dialer OptionsOther Dialer Options
Other Dialer Options
Many of the numbers in the Dialer have additional functionality besides enabling
you to type a number.
To access the additional functionality of a number key:
1 Place your finger near the center of the screen, this becomes the number 5.
2 Slide your finger from the center of the screen towards a number. RAY reads
out the number of that key and then (after a moment) reads out the function
of that number key.
For example, to erase the last digit of the number that you have entered,
slide your finger from the center of the screen towards the number 8. When
your finger reaches 8, RAY says 8. Hold your finger in that place on the screen
and after a moment RAY says the word Delete. Then, lift your finger off the
screen and RAY deletes the last digit that you entered.
The following are the additional functions provided by each number on the Dialer
keypad:
4 – Previous: Returns to the previous screen and leaves the Dialer.
2 – Read: Reads out the entire number that you entered.
6 – Dial: Dials the number that you entered.
7 – Delete Number: Clears the entire number that you entered.
8 – Delete Last Digit: Erases the last digit of the number that you entered.
Note
You can also use RAY’s speech recognition options to make a call, as
described in the
Calling Using Speech Recognition
section on page 47.