ray VISION - Entering a New Contact

RAY User Guide Using RAY
49
Entering a New Contact
Entering a New ContactEntering a New Contact
Entering a New Contact
After you receive a call or make a call, you can add that number to the Contacts
list from the Call Log, Miss Calls, Incoming Calls list or Missed Calls list.
► To creat
To creatTo creat
To create a new Contact:
e a new Contact: e a new Contact:
e a new Contact:
1 Select the call whose number you want to add to the Contacts list.
2 This number is added as the phone number of the new Contact.
A keyboard screen appears in which you can enter the name of the Contact.
Figure 20: Alphanumeric Screen – Enter a Contact Name
This RAY keyboard is based on a 12-key alphanumeric screen. Each key
represents three or more letters and symbols like a regular telephone device.
3 Select a letter/symbol by moving your finger to the selected key and leaving it
there until RAY says the desired letter. Lift your finger to select that letter.
Alternatively, you can use RAY’s speech recognition option, as follows:
 When the alphanumeric screen is first displayed, RAY is in speech
recognition listening mode until you touch the screen with your fingers.
 You can now say the letters or words (even complete sentences). After a
one second silence, RAY reads it out.


 Note
Contacts can also be added to your Contact list from your personal RAY
web page on the Internet available at the RAY website, as described in
Chapter 5, Remote Control and Configuration on page 68.