RAY User Guide Getting Started with RAY
22
Turning RAY Off
RAY can be powered down completely or it can be in Sleep mode. Sleep mode
saves battery while retaining RAY’s connection to the cellular and/or Wi-Fi
network.
When RAY is completely powered down, it takes a few seconds longer to power
back on than when it is in Sleep mode.
Sleep Mode
Sleep ModeSleep Mode
Sleep Mode
RAY automatically goes to sleep mode after it is not used for a while. The following
also puts RAY in Sleep mode.
►
To go to Sleep mode:
To go to Sleep mode:To go to Sleep mode:
To go to Sleep mode:
1 Short press the ON/OFF button shown in Error! Reference source not
found.. RAY plays a special sound.
2 You can power RAY back up by pressing the ON/OFF button. RAY then opens
the previously displayed screen.
P
PP
Powering Off RAY
owering Off RAYowering Off RAY
owering Off RAY
►
To power off RAY:
To power off RAY:To power off RAY:
To power off RAY:
1 Long press the ON/OFF button shown in Error! Reference source not
found.. RAY says Power Menu.
2 Place your finger somewhere in the middle of the screen and slide it towards
the number 2. When RAY say Power Down, lift your finger off the screen.
3 You can power RAY back up with a long press of the ON/OFF button. Hold the
ON/OFF button until you feel RAY vibrate. RAY says Home Menu when it is
ready for you to start using it.
To Next Page
Loading...