RAY User Guide Using RAY
43
►
To define a speed dial preset:
To define a speed dial preset:To define a speed dial preset:
To define a speed dial preset:
1 Open the Home Menu.
2 Place your finger somewhere in the middle of the screen and slide it towards
the number 1 until RAY says Speed Dial. The Speed Dial Menu opens and
RAY says Speed Dial Menu.
3 Place your finger somewhere in the middle of the screen and slide it towards
one of the Speed Dial preset keys in positions 1, 2, 3, 6, 7, 8 or 9.
4 If no Contact was assigned to this preset key, then RAY says Select Contact
and opens the Contacts List.
If a Contact was already assigned to this preset key, then RAY reads out the
name of the Contact assigned to this preset key. To change this Contact, hold
your finger on this key until RAY says Select Contact. The Contact List is
open.
5 Select a Contact by placing your finger in the center of the screen. RAY then
reads out the name of the selected Contact. You can also slide your finger
downwards so that RAY reads out the names in the Contacts List. Lift your
finger to assign the Contact that you hear to this Speed Dial preset key.
►
To speed dial:
To speed dial:To speed dial:
To speed dial:
1 Open the Home Menu.
2 Place your finger somewhere in the middle of the screen and slide it towards
the number 1 until RAY says Speed Dial. The Speed Dial Menu opens and
RAY says Speed Dial Menu.
3 Place your finger somewhere in the middle of the screen and slide it towards
one of the Speed Dial preset keys in positions 1, 2, 3, 6, 7, 8 or 9.
4 RAY reads out the name of the Contact assigned to this preset key. Lift your
finger to dial this Contact.
To Next Page
Loading...