Need help?Do you have a question about the Rayco RG55 and is the answer not in the manual?
General| Brand | Rayco |
|---|---|
| Model | RG55 |
| Category | Log Splitter |
| Language | English |
Highlights that most accidents are caused by failure to observe safety rules and precautions.
Highlights severe hazards like crushing and cutting from moving parts and the need for lock-out procedures.
Covers hazards related to fuels, lubricants, and the risk of fire and explosion.
Details critical factors for safe operation on slopes, including speed, terrain, and direction.
Outlines the steps for safely locking out energy sources before performing maintenance or repair.
Offers crucial advice on preventing trailer "whipping" and safe loading practices for transport.
Warns about dangers of improper loading of the machine onto a trailer, especially with operator controls.
Covers intended use, operating controls, checking safety devices, and avoiding hazards during operation.
Provides guidance for tagging out equipment when lockout is not feasible or practical.
Covers checks for tow vehicle, tires, seat belts, and safe driving practices while towing.
Details the two methods for stopping the machine abruptly using emergency switches.
Provides steps to disengage the wheel drive motors for towing the machine.
Recommends thorough inspection of the hydraulic system and machine before operation.
Provides detailed instructions and safety warnings for starting the machine with jumper cables.
Offers guidance on stump removal, including calling 811 and warnings about the cutter wheel.
Provides a step-by-step guide on how to remove stumps using the RG55R.
Explains the procedure for stopping the machine, emphasizing cutter wheel rotation.
Provides instructions and warnings for transporting the stump cutter on a trailer.
Provides step-by-step instructions for starting the machine using the remote control system.
Explains how to engage and disengage the cutter wheel and its RPM parameters.
Guides on starting the engine, including warm-up procedures and hot weather starting aids.
Details safety measures related to the cutter wheel, including never going near it while on.
Explains how to use the maintenance interval schedule for proper equipment care.
Details how to check and maintain the engine oil level and filter.
Covers procedures for checking, filling, and draining the fuel tank.
Outlines steps for flushing and refilling the radiator and coolant system.
Discusses the importance of cutting teeth and the use of Rayco genuine parts.
To Next Page
