Rayco RG55 - Stump Removal Procedure; Prepare the Machine at the Stump; Remove the Roots; Repeat STEP 4 Consecutively

RG55 Operation • Service • Maintenance
800.392.2686
33
Operation
00-02-0839 - 8 - 2012-09-21
Parameter Menu
The following lists the parameters that can be viewed on the PV25.
PGN Description Notes
Internal Machine hours
If set to OFF, the machine
hours do not increment.
However, if at any point
machine hours were
accumulated, that hour
value maintains through
power cycles.
61444 Engine Speed (Eng RPM)
65263 Engine Oil Pressure (Oil Pres)
65262
Engine Coolant Temperature (Cool
Tmp)
65271 Voltage (Sys Volt)
65271
Battery Potential (Switched) (Bat
Volt)
65253 Total Engine Hours (Eng Hrs)
61443
Percent Load at Current RPM
(Load @ RPM)
65257 Total Fuel Used
65266
Average Fuel Economy (Avg
Econ)
65257 Trip Fuel
65262 Engine Oil Temperature(Oil Temp)
65270
Exhaust Gas Temperature (Exh
Tmp)
65270
Air Filter Differential Pressure
(AirDifPr)
64891 Percent Soot (Soot Lvl)
Only available if Tier 4
is ON in the Main menu.
65110 Catalyst Temperature (Cat Temp)
Only available if Tier 4
is ON in the Main menu.
64891 Percent Ash Ash Lvl)
Only available if Tier 4
is ON in the Main menu.
64947
Exhaust Filter Outlet Temp
(ExOutTmp)
Only available if Tier 4
is ON in the Main menu.
64948
Exhaust Filter Inlet Temp
(ExhInTmp)
Only available if Tier 4
is ON in the Main menu.
65110 Catalyst Tank Level (DEFLvl)
Only available if Tier 4
is ON in the Main menu.