RG55R Operation • Service • Maintenance
800.392.2686
37
Engine Identification
When contacting your certified Kubota dealer to service the
engine, always specify engine model name, code number
and serial number.
The engine model, code number and it’s serial number need
to be identified before the engine can be serviced or parts
replaced. The Engine Model Name and Number Label (1)
has this information convenietly located on the engine as
shown above.
Note: Rayco recommends writing these numbers down
inside all three manuals (Operator Booklet, Operator Service
Maintenance Manual, Parts Manual) that are provided with
your RG55.
Maintenance
1
UNDERSTAND AND HEED TO THE
INSTRUCTIONS LISTED IN THE SAFTEY
SECTION OF THE MANUAL. IN IT’S ENTIRETY,
BEFORE SERVICING THE MACHINE.
NOTICE
Park the machine on stable and level ground before
service or maintenance is performed.
NOTICE
Let the temperature of the engine decrease before
you start the job.
NOTICE
Stop the engine, remove the key, hang a DO NOT
OPERATE tag at the operator station.
NOTICE
Do not make unauthorized modifications to the
RG55 or the engine. This can cause damage,
decrease engine life, void any warranty.
To Next Page
Loading...
Need help?
General
