2. Remove the mirror.
Use a cleaning cloth with cleaning fluid to clean
the mirror.
8.3.5 Motion system
Information
To ensure a long service life of the machine with high quality and performance, you should
spend a few minutes per week (depending on the environment) on cleaning.
After cleaning the rails it is necessary to clean the table, the interior of the machine and the
cleaning drawer.
X-axis rail cleaning
1. Clean the entire length of the x-axis rail with a
cleaning cloth and a cotton swab. Use a mild
cleanser (Trotec) to clean the bearing - contact
your local Trotec Service.
Notice
After cleaning is the ideal time to lubricate the axles.
ENGLISH (Translation)
07/2021
66 / 83
To Next Page
Loading...
