9.SelectSAVE.
Ifyourdisplayhasmorethan1cardslotthena
messageisdisplayedpromptingyoutoselectthe
slotyouwanttosavedatato,ifyourdisplayonly
has1cardslotthenyouwillnotbeprompted.
10.SelectSD1foramemorycardinthetopcardslot,
orSD2foramemorycardinthebottomcardslot.
Aconrmationdialogisdisplayed.
11.SelectOK.
Savingtrackstoamemorycard
WiththeHomescreendisplayed:
1.Ensureyouhaveamemorycard(NOTachart
card)insertedintoacardslot.
2.SelectMyData.
3.SelectImport/Export.
4.SelectSaveDatatoCard.
5.SelectSaveTrackstoCard.
TheTrackslistisdisplayed.
6.Selectthetrackortracksyouwanttosave,or
selectSelectAll.
7.SelectSave.
Theon-screenkeyboardisdisplayed.
8.Usingtheon-screenkeyboardenterthelename
youwanttosavetheleas.
9.SelectSAVE.
Ifyourdisplayhasmorethan1cardslotthena
messageisdisplayedpromptingyoutoselectthe
slotyouwanttosavedatato,ifyourdisplayonly
has1cardslotthenyouwillnotbeprompted.
10.SelectSD1foramemorycardinthetopcardslot,
orSD2foramemorycardinthebottomcardslot.
Aconrmationdialogisdisplayed.
11.SelectOK.
Importingwaypoints,routes,ortracksfrom
amemorycard
WiththeHomescreendisplayed:
1.Ensureyouhaveamemorycardcontainingthe
userdataingpxformatinoneofthecardslots.
2.SelectMyData.
3.SelectImport/Export.
4.SelectRetrievefromCard.
Thelebrowserisopened.
5.Browsetoandselecttheleyouwanttoimport.
Aconrmationdialogisdisplayed.
6.SelectOK.
Note:WhenRoutesandTracksareimportedthey
willbehiddenbydefault,todisplaytheimported
routesandtrackspleaserefertotheShowingor
hidingroutesandtrackssection.
Erasinguserdatalesfromamemorycard
WiththeHomescreendisplayed:
1.Ensureyouhavethememorycardcontainingthe
datainoneofthecardslots.
2.SelectMyData.
3.SelectImport/Export.
4.SelectErasefromCard.
Thelebrowserisopened.
5.Browsetoandselecttheleyouwanttoerase.
Aconrmationdialogisdisplayed.
6.SelectYes.
Erasingwaypoints,routes,andtracksfrom
thesystem
Note:Thefollowingprocedurepermanently
erasesselectedorALLwaypoints,routes,or
tracksstoredonthedisplay.BEFOREproceeding,
ensurethatyoubackupanydatathatyouwantto
keepontoamemorycard.
WiththeHomescreendisplayed:
1.SelectMyData.
2.SelectImport/Export.
3.SelectErasefromSystem.
4.SelectEraseWaypointsfromSystem,Erase
RoutesfromSystem,orEraseTracksfrom
System,asappropriate.
Managingdisplaydata
57