ItemDescription
1Networkconnection
2Powerconnection
3Transducerconnection
Makingconnections
Followthestepsbelowtoconnectnetwork,transducerandpower
cablestoyourunit.
1.Ensurethatthevessel’spowersupplyisswitchedoff.
2.Ensurethatthedevicebeingconnectedtotheunithasbeen
installedinaccordancewiththeinstallationinstructionssupplied
withthatdevice.
3.Ensuringcorrectorientationpushthecableconnectorfullyonto
thecorrespondingconnectorontheunit.
4.Turnthelockingcollarclockwisetosecurethecables.
Cablesandconnections
21