Chapter 2: Transducer Installation 25
1
Can be used In-Hull or Transom mounted
2
Requires E66047 kit to complete transom mount installation
3
Includes transom mounting kit
4
Includes high-speed fairing
5
Must be installed with a high-speed fairing (sold separately)
Accessories
The following optional equipment is also available from Raymarine for your
transducer:
Notes: (1)
To ensure proper alignment and a secure fit, many thru-hull transducers
require a fairing for installation. In addition to improving sounder perfor-
mance at all speeds, the fairing allows better fitting to the hull and dramat-
ically increases the sealing surface.
(2)
This information was current as of the date this handbook was printed.
New transducer models are constantly becoming available. Check with
your dealer for the most current list.
E66057
4
(B744VL)
Depth,
Speed,
Temp
Bronze 600 W
In-Hull E66008
(P79)
Depth Plastic 600 W
E66049
1
(M260)
Depth Cast Urethane 1000W
E66075
(R199)
Depth Cast Urethane 2000W
Table 2-1: Accessories
Item Part No. For Use With
Transducer Extension Cable, 10 ft (3 m)
Transducer Extension Cable, 18 ft (5 m)
Transducer Y-Cable
E66009
E66010
E66022
Depth Transducers
Depth Transducers
Speed/Temp Transducers
High Speed Fairing E66023
E66025
E66034
E66056(B744V), E66057(B744VL)
E66024 (B256)
E66033 (B260)
In-Hull Mounting Kit
Transom Mounting Kit
E66050
E66047
E66049 (M260)
E66049 (M260), E66046 (M256)
Mounting
Method
Part No.
(Model)
Sensor
Type Material
Max.
Power
To Next Page
Loading...
