Raymarine DSM300 - Sounder Functions

20 DSM300 Installation Manual
1.7 Configuration
How you configure your DNT300 depends on the type of display to which you will
be connecting it.
Configuring the DSM300 with E Series Displays
The E Series system operates on the SeaTalk
hs
network, which uses cables with an
RJ-45 modular connector. See Table 1-1 for a list of available E Series cables. When
the DSM300 is used with a single display, connection is made via a SeaTalk
hs
Crossover Coupler.
Figure 1-11: Configuring an E Series System - Single Display
When used in a multiple display system, connect the DSM300 to the SeaTalk
hs
Network Switch.
Figure 1-12: Configuring an E Series System - Multiple Displays
E Series Display
DSM300
SeaTalk
hs
Cable
SeaTalk
hs
Cable
Crossover Coupler
E55060
D7593-1
E Series Display
E Series Display
DSM300
SeaTalk
hs
Network Switch
E55058
SeaTalk
hs
Cable
SeaTalk
hs
Cable
SeaTalk
hs
Cable
D7602-1