Raymarine E140 - Designating the Data Master; GPS Check

5.2Designatingthedatamaster
Thefollowingtaskmustbeperformedonthemultifunctiondisplay
thatyouwanttodesignateasthedatamaster:
1.PresstheMENUbutton.
2.SelecttheSystemSetupmenuitem.
3.SelecttheSystemIntegrationmenuitem.
4.SelecttheDataMaster>ONoption.
5.PresstheOKbutton.
5.3GPScheck
CheckingGPSoperation
YoucancheckthattheGPSisfunctioningcorrectlyusingthechart
application.
1.SelecttheChartpage.
2.Checkthescreen.
Withthechartdisplayed,youshouldsee:
Yourboatposition(indicatesaGPSx).Yourcurrentposition
isrepresentedbyaboatsymbolorsolidcircle.Yourpositionis
alsodisplayedinthedatabarunderVESPOS.
Note:Asolidcircleonthechartindicatesthatneitherheading
norCourseOverGround(COG)dataisavailable.
Systemchecks
55