Raymarine E140W - Customizing the Databar

20.2Customizingthedatabar
Movingthedatabar
1.PresstheDATAbutton.
2.PressandholdtheDATABARsoftkeyuntiltheDatabaseSetup
Menudialogisdisplayed.
3.Usingthetrackpad,selectthePositionmenuitem.
4.Usingthetrackpad,selecttheT oporSideoption,asappropriate.
5.PresstheOKbutton.
Resizingthedatabar
1.PresstheDATAbutton.
2.PressandholdtheDATABARsoftkeyuntiltheDatabaseSetup
Menudialogisdisplayed.
3.Usingthetrackpad,selecttheDatabarSizemenuitem.
4.Usingthetrackpad,selecttheNormalorLargeoption,as
appropriate.
5.PresstheOKbutton.
Changingthedatadisplayedinthedatabar
1.SelecttheDatabarSetupMenu:
i.PresstheMENUbutton.
ii.SelectDatabarSetup.
TheDatabarSetupMenuisdisplayed.
2.Toadddatatothedatabar:
i.WiththeDatabarSetupMenudisplayed,selectthe
Conguremenuitem.
Aredborderwillappearinthedatabar,identifyingthe
currentlyselecteditem.
ii.Usingthetrackpad,selectthedesiredpositioninthedatabar
forthenewdata.
iii.SelecttheADDDATAsoftkey.
iv.Selectthedatagroupthatcontainsthetypeofdatayouwant
toadd.
v.Selectadataelementfromthedatagroup.
vi.Selectanappropriatedatatypeforthedata.
vii.PresstheOKbutton.
3.Tomovedatainthedatabar:
i.WiththeDatabarSetupMenudisplayed,selectthe
Conguremenuitem.
Aredborderwillappearinthedatabar,identifyingthe
currentlyselecteditem.
ii.SelecttheMOVEDATAsoftkey.
iii.Usingthetrackpad,movetheitemofdatatothedesired
positioninthedatabar.
iv.PresstheOKbutton.
4.Toremoveadataitemfromthedatabar:
i.WiththeDatabarSetupMenudisplayed,selectthe
Conguremenuitem.
Aredborderwillappearinthedatabar,identifyingthe
currentlyselecteditem.
ii.Usingthetrackpad,highlightthedataitemthatyouwantto
remove.
iii.SelecttheREMOVEDATAsoftkey.
Customizingyourdisplay
231