Raymarine E140W - Waypoint Groups; Erasing Waypoints

Movingawaypointbyenteringnewcoordinates
WiththeWaypointListdisplayed:
1.SelecttheVIEWANDEDITDETAILSsoftkey.
TheEditWaypointdialogisdisplayed.
2.SelectthePosition,Bearing,orRNGeld,asappropriate.
3.Usetherotarycontroltoenterthenewcoordinates,orselectthe
EDITUSINGKEYPADsoftkeyandusetheon-screenkeyboard.
Erasingwaypoints
Erasingawaypointonscreen
Inthechartorradarapplication:
1.Movethecursortotherelevantwaypoint.
Thesoftkeytoolbarchangestoshowthewaypointoptions.
2.SelecttheERASEWAYPOINTsoftkey.
3.SelecttheYESsoftkeytoconrm,orNOsoftkeytocancel.
Erasingawaypointusingthewaypointlist
WiththeWaypointListdisplayed:
1.Highlightthewaypointyouwanttoerase.
2.SelecttheERASEWAYPOINTsoftkey.
3.SelecttheYESsoftkeytoconrm.
Note:Ifarouteishidden,itswaypointscanstillbedisplayed.If
youattempttoeraseawaypointfromahiddenroute,awarningis
displayed,andthewaypointcannotbeerased.
Erasingallwaypoints
1.PresstheDATAbutton.
2.SelecttheARCHIVEANDTRANSFERsoftkey.
3.SelecttheERASEFROMSYSTEMsoftkey.
4.UsetheSELECTLISTsoftkeytoselecttheWPToption.
5.SelecttheERASEALLWAYPOINTSsoftkey.
6.SelecttheYESsoftkeytoconrm,ortheNOsoftkeytocancel.
Note:Ifarouteishidden,itswaypointscanstillbedisplayed.If
youattempttoeraseawaypointfromahiddenroute,awarningis
displayed,andthewaypointcannotbeerased.
Waypointgroups
Inordertomakeyourwaypointseasiertomanage,youcanorganize
themintogroupsofyourchoice.Whenshing,forexample,you
mayonlywishtoseethewaypointsthatindicategoodshingsites.
Providedthatyouhavenotchangedthedefaultgroup,allwaypoints
areautomaticallyplacedinthedefault“MyWaypoints”groupwhen
theyarecreated.
Note:Awaypointcanonlybelongtoonegroup.
Displayingthewaypointgrouplist
1.PresstheWPTSMOBbutton.orselectMyWaypointsfrom
thehomescreen.
2.SelecttheMANAGESYMBOLSANDGROUPSsoftkey.
TheWaypointGroupListisdisplayed.
Youcannow:
•Makeanewwaypointgroup.
•Movewaypointsbetweengroups.
•Renamegroups.
•Erasegroups.
Usingwaypoints,routesandtracks
55