Raymarine e7D - Page 91

1.SelectMenu.
2.SelectMyData.
3.SelectDisplayMyData.
4.SelectSelectRoutesToDisplay.
Thedisplayroutesdialogisdisplayed.
5.SelecttheroutetoswitchbetweenShowandHide.
Selectingaroutetorevieworedit
1.Dooneofthefollowingtoselecttherequiredroute:
•Withthechartapplicationactive,selectarouteonscreento
displaytheroutecontextmenu.
•Withthechartapplicationactive,select:Menu>MyData>
RouteListandselecttherequiredroutefromthelist.
•Fromthehomescreen,select:MyData>RouteListand
selecttherequiredroutefromthelist.
Addingawaypointtoarouteonthechartscreen
Fromthechartapplication:
1.Selecttheappropriatelegoftheroute.
Theroutecontextmenuisdisplayed.
2.SelectInsertWaypoint.
3.Movethecursorsothatitstretchesthelegoftheroutetothe
desiredpositiononthechart.
4.PresstheOkbutton.
Removingawaypointfromaroute
Fromthechartapplication:
1.Selectthewaypointyouwanttoerase.
Thewaypointcontextmenuisdisplayed.
2.SelectEraseWaypoint.
Theerasewaypointpopupmessageisdisplayed.
3.SelectYestoconrmorNotocanceltheaction.
Movingawaypointwithinaroute
Fromthechartapplication:
1.Positionthecursoroverthewaypointyouwanttomove.
Thewaypointcontextmenuisdisplayed.
2.SelectMoveWaypoint.
3.Movethecursorsothatitstretchesthelegoftheroutetothe
desiredpositiononthechart.
4.PresstheOkbuttontoconrmthenewlocation.
Erasingroutes
Erasingadisplayedroute
Fromthechartapplication:
1.Selecttheroute.
TheRoutecontextmenuisdisplayed.
2.SelectEraseRoute.
Theeraseroutepopupmessageisdisplayed.
3.SelectYestoconrm,orNotocanceltheaction.
Erasingarouteusingtheroutelist
Fromthechartapplicationmenuorthehomescreen:
1.SelectMyData.
2.SelectRouteList.
Theroutelistisdisplayed.
3.Selecttherouteyouwanttoerase.
4.SelectEraseroute.
Theeraseroutepopupmessageisdisplayed.
5.SelectYestoconrm,orNotocanceltheaction.
Note:Youcandeleteanyroute,exceptfortheonethatyouare
currentlyfollowing.Whenyouerasearoute,onlythosewaypoints
associatedwiththatroutearedeleted.
Erasingallroutes
Fromthehomescreen:
1.SelectMyData.
2.SelectEraseDataFromSystem.
3.SelectEraseRoutesFromSystem.
Theeraseroutesfromsystemdialogisdisplayed.
4.SelectEraseAll.
Theconrmdeletepopupmessageisdisplayed.
5.SelectYestoconrm,orNotocanceltheaction.
Usingwaypoints,routesandtracks
91