4.8Caterpiller(CAT)engine
connections
TheECI–100canconnecttocompatibleCaterpiller
enginesystems.
TheCaterpillerY-Loomcable(E70305)isrequired.
DisconnecttheexistingDeutschconnectorfromthe
rearoftheMPD,connecttheDeutschconnectors
ontheY-LoomcabletotherearoftheMPDandto
thecablethatwasjustdisconnectedfromtheMPD.
FinallyconnecttheDeviceNetendoftheY-Loom
cabletotheDeviceNetconnectorontheECI-100.
Singleengineconnection
1.SeaTalk
ng®
backbonepowersupply(12Vdc)
2.CATMPD
3.CaterpillerY-Loomcable(E70305)
4.Caterpillerenginesystembus(previously
connectedtotheMPD)
5.ECI-100unit
Note:
Multi-engineconnection
AnECI-100andY-Loomcableisrequiredforeach
engine/MPD.
1.SeaTalk
ng®
backbonepowersupply(12Vdc)
2.Engine1—CATMPD
3.Engine1—CaterpillerY-Loomcable(E70305)
4.Engine1—Caterpillerenginesystembus
(previouslyconnectedtotheMPD)
5.Engine1—ECI-100unit
6.Engine2—CATMPD
7.Engine2—CaterpillerY-Loomcable(E70305)
8.Engine2—Caterpillerenginesystembus
(previouslyconnectedtotheMPD)
9.Engine2—ECI-100unit
CompatibleCaterpillersystems
Compatiblesystems
CATenginesystemsthatincludethefollowing
dedicatedMarinePowerDisplays(MPD)are
compatible:
•ColorMPD(compatiblewithCATelectronically
controlledmarineenginesfromtheC7to3500C
Series)
•MPD(CompatiblewithCAT3126Bto3500B
Seriesengines)
•MiniMPD
EachCATenginemusthaveadedicatedMPD,
engineswithoutadedicatedMPDarenotsupported.
Note:TheCATMessengerdisplayisnot
supported.
Caterpillerenginedata
WiththeECI-100connectedtoacompatibleCAT
enginesystemthefollowingenginedatacanbe
displayedonaLightHouse
TM
MFD.
EngineData
EngineSpeed(RPM)
EngineFuelPressure
Engine%Load
EngineFuelFlowRate
EngineHoursEngineBoostPressure
EngineOilTemperature
BatteryVoltage
EngineCoolantTemperatureTransmissionOil
Temperature
EngineOilPressureTransmissionOilPressure
EngineCoolantPressure
FuelLevel
TransmissionGearPosition
EngineAlarms
HighCoolantTemperatureLowCoolantLevel
LowOilPressure
HighBoostPressure
LowOilLevelEngineOverSpeed
LowFuelPressure
HighTransmissionOil
Temperature
LowBatteryVoltage
LowTransmissionOil
Pressure
30ECI–100