Raymarine eci-100 - Supported Engine Data Messages; Standard J1939 Supported Parameters; NMEA 2000 Supported Parameters

6.1Initialpowerontest
Onceyourproductisfullyconnectedandinstalled,
performaninitialpowerontesttoverifycorrect
operation.
1.Switchonthevessel’spowersupply.
2.Switchonthevessel’sengine(s).
Theengine(s)hastobeonandprovidingpower
toitsCANbusinorderforbothLEDstofunction.
3.LookatthediagnosticsLEDs.
•DuringpoweruptheLEDswillbeilluminated
red(powerupusuallytakesapproximately6
seconds).
•DuringnormaloperationtheLEDshouldash
greenonceevery15seconds.
4.IftheLEDashesinadifferentsequence,refer
totheLEDDiagnosticssectionfordetails.
34ECI–100