Raymarine Micro-Talk E70361 - Tools and Site Selection

3.4Toolsrequiredfor
installation
1Powerdrill
2
4mm(11/64)drillbit(forxingstuds)
3
22mm(forcableholewhensurfacemounting)
4
Pozi-drivescrewdriver(onlyrequiredforPolemount
installations)
5
Size4(2.5mm)HexKey(onlyrequiredforPole
mountinstallations)
3.5Warningsandcautions
Important:Beforeproceeding,ensurethatyouhave
readandunderstoodthewarningsandcautions
providedintheChapter1Importantinformation
sectionofthisdocument.
3.6Selectingalocation
Warning:Potentialignition
source
ThisproductisNOTapprovedforusein
hazardous/ammableatmospheres.Do
NOTinstallinahazardous/ammable
atmosphere(suchasinanengineroomor
nearfueltanks).
Micronetdevicelocation
requirements
Yourunitincludesawirelesstransceiverthatutilizesthe
Micronetnetworkingprotocol.Theproduct’swireless
performanceshouldbecheckedatthedesiredlocation
beforedrillinganymountingholes.
Foroptimumperformancetheproductshouldbe
installedabovedecks,onahorizontallysurfacewiththe
LED‘arrow’pointingtowardsthebowofthevessel.
Whenplanningtheinstallationlocation,alsoconsider
thefollowing:
•Theproductshouldhaveaclearlineofsighttothe
Micronetproductsitwillconnectwith.Rangefor
Planningtheinstallation
15