Raymarine p70r - Page 88

Sail boat settings
These settings are only available to sail boats.
The Sail Boat settings menu can be accessed from: Menu > Set-up > Autopilot Calibration > Sail
Boat Settings.
Note: When connected to a SeaTalk system the Sail boat settings listed below are part of the User
settings menu: Menu > Set-up > Autopilot Calibration > User Settings.
Item Description Evolution autopilots SeaTalk and SPX SmartPilot
Gybe inhibit
With gybe inhibit set to allow, the
autopilot will allow the vessel to tack
through / into and away from the
wind. With gybe inhibit set to prevent,
you can only tack through / into the
wind.
Gybe inhibit does not effect Auto Turn
• Allow Gybe
• Prevent Gybe
• Allow Gybe
• Prevent Gybe
Wind Type This option determines whether the
vessel steers to apparent or true wind
in Wind Vane mode.
• True
• Apparent
• True
• Apparent
Wind Trim
Response
Wind Trim Response controls how
quickly the autopilot responds to
changes in wind direction. Higher
wind trim settings will result in a
system that is more responsive to
wind changes.
N/A
• 1 to 9
• 5 (default)
Wind Shift
Alarm
This option enables you to enable
and disable the Wind Shift alarm.
• On (default)
• Off
N/A
Note: These features are only available if wind data is available.
88
p70 / p70R