Need help?Do you have a question about the Raymarine Q047 and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | Q047 |
| Category | Marine Equipment |
| Language | English |
Register your Raymarine product online for warranty coverage and support.
Crucial warnings regarding product installation, electrical safety, calibration, and navigation use.
Information on how Raymarine equipment adheres to Electromagnetic Compatibility standards.
Notes on the accuracy of information and potential product specification changes.
Lists and illustrates the components included in the tiller drive package.
Provides key measurements for the tiller drive unit, including midstroke length and diameter.
Defines dimension A as the distance from the mounting socket to the tiller pin.
Defines dimension B as the distance from the rudder stock's center line to the tiller pin.
Steps for clamping the tiller, marking dimensions A and B, and ensuring correct angles.
Procedure for drilling and securing the tiller pin with epoxy adhesive.
Instructions for drilling and fixing the mounting socket, with a caution on pushrod loads.
Overview of optional accessories like pushrod extensions, tiller brackets, and sockets.
Guidance on selecting and using pushrod extensions to adjust reach.
Steps to measure dimension C and select the appropriate pushrod extension part number.
How to measure dimensions D or E to choose the right tiller bracket.
Procedure for positioning, drilling, and securing the tiller bracket with epoxy.
Instructions for using the cantilever socket assembly for vertical mounting.
Procedure to measure, cut, and secure the cantilever rod assembly.
How to measure dimension G to choose the appropriate pedestal socket.
Steps for marking, drilling, and securing the pedestal socket assembly.
Lists available tiller pin sizes for non-standard installations.
Instructions for connecting the tiller drive plug and socket to the control unit.
Guidance on cable length, routing, and connecting wires to ACU motor terminals.
Procedure for applying a template, drilling holes, and securing the socket to a bulkhead.
Details on maximum boat displacement, helm speed, operating conditions, and overall dimensions.
Blank pages reserved for user annotations and observations.
To Next Page