Thesplit-ringslideseasilyforapproximately1cmontotheconnector,beforebuttingupagainst
theconnectormoulding.
3.Carefullyinsertthepointedendofthesuppliedtoolintothesplit-ring’ sgap(labelled‘C’inthe
illustration).
Thetoolwidensthegapinthesplitring,enablingthesplitringtobepushedfurtherbackonto
theconnectorinthefollowingstep.
Important:
•Alwaysusethesuppliedtoolwhenattachingthesplitring.Thesplitringmaybecome
overstretchedandbreakifyoutrytoattachitwithoutusingthetool.
•Asparesplitringissuppliedwiththelockingcollarassembly
,incaseofbreakage.
Connections37
To Next Page
Loading...
