Chapters and Pages
3
www.raymarine.com
Default Chapter and Page Diagram
Remote Control Operation
In this mode, the Remote Display is able to control the functions of other
displays on the Micronet network.
All remote control screens are displayed in "reverse", with white text on a
black background, to allow immediate recognition of remote control mode.
Remote control mode is cancelled if a period of thirty seconds elapses in
which no key is pressed. The Remote Display automatically returns to
information display mode.
To enter Remote Control mode
Press and hold the button.
The Remote Display builds a list of the Micronet displays on the
network that are configured for remote control. This list allows
the user to select a display to control with the Remote Display.
The display that is currently selected for control is indicated by
the and markers around the display identifier.
The screen of the selected display will flash to indicate that it is under
remote control.
Displays on the network can be added to or removed from the list and the
order of the list can be modified. in setup.
To Next Page
Loading...
