1-4 SL70M & SL70C PLUS Pathfinder Radar Displays
Operating Modes
Operating Modes
Set Up Options
Set up options allow you to choose what is displayed, how it is displayed
(including language and units), bearing mode and how the display operates
with other equipment. You can view the cursor position and a variety of data
from other equipment, e.g. speed, heading, depth, wind and tide information
in a set of user-selectable data boxes.
Display options are provided in System Set Up, described in Chapter 5.
Screen Presentation Options, described in Chapter 2 allow you to switch the
cursor and data boxes On/Off. The cursor box and user-selected data boxes
can be moved around the screen.
Operating Modes
You can view a full screen radar.You can also set Windows On to split the
display into two half-screen windows to show supplementary data. The main
operating mode (radar) is displayed in the upper window; you choose what is
displayed in the lower window.
The following are available:
Half-Screen Window Options
• Radar display: Data can be displayed full screen or in a half-screen win-
dow.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint.
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint.
• Nav Data: This shows nine (mono display) or sixteen (colour display) data
boxes, providing navigational data in the units specified in your set up.
Note that up to 6 of these data boxes are also available as a user-selectable
group (see Section 5.3).
You select the operating mode and windows using the
DISPLAY key as
described in Chapter 2.
Table 1-1: Operating Modes and Window Options
Display Full-screen mode Half-screen Window Options
SL70C, SL70M PLUS Radar CDI, BDI or Nav Data
To Next Page
Loading...
