2-10 SL70M & SL70C PLUS Pathfinder Radar Displays
Customizing the
Screen Presentation
Options
Customizing the Screen Presentation Options
The SCREEN soft key lets you switch the following screen presentation options
on or off:
Switching the Cursor Data Box On and Off
The cursor data box provides the cursor’s position in latitude/longitude and/or
bearing/range. If you wish to see a full image, you can switch the data box off.
➤ To control the cursor data box:
1. Press the
SCREEN soft key.
2. Press the
CRSR BOX soft key to toggle the setting from OFF to ON or from ON
to OFF.
3. To return to the default soft key display, press
ENTER.
➤ You can use the context sensitive cursor to select and move the cursor data box
(the label
BOX is displayed). See Moving and deleting items with the context-
sensitive cursor on page 1-10
Switching Radar Range Rings
The radar range rings can be turned on or off. They are normally left on, but
you may wish to turn them off if you are using VRM/EBLs or guard zones (see
Section 3.4 and Section 3.5) to make the display clearer.
➤ To turn the range rings on or off:
1. Press the
SCREEN default soft key.
2. Press the
RANGE RINGS soft key to toggle the setting from OFF to ON or from
ON to OFF.
To return to the default soft key display, press
ENTER.
Data Boxes
A group of up to six data boxes can be displayed, if the information is available
on your system. You select which data is displayed in the boxes during
system set up as described in Chapter 5:Setting Up the System Defaults.
The default data box positions are along the bottom of the display. Each box
can be moved to the required position on the screen using the context-sensitive
cursor.
Note: If you select BDI, CDI or Nav Data for display in a half-screen window,
the data boxes are temporarily hidden.
D3643-2
SCREEN
CRSR BOX
OFF ON
RNGE RNGS
OFF ON
DATABOXES
OFF ON
WAYPOINT
OFF ON
SCREEN
CRSR BOX
OFF ON
BOX
SCREEN
RNGE RNGS
OFF ON
To Next Page
Loading...
