Raymarine SmartPilot Series User Manual

4 S1 Wheel and Tiller Pilots Operating Guide
TRACK
Press for Track
mode from Auto
(if a navigator is
connected)
Press to accept
waypoint advance
Press for 1 second
to skip waypoint
AUTO
Press for Auto mode
Course change keys
Port 1˚ Starboard 1˚
Port 10˚ Starboard 10˚
STANDBY plus AUTO
Press for Wind Vane mode
(if a wind vane is connected)
-1 plus +1
Press for Response level
Press for 1 second
for Rudder Gain
+1 plus +10
Press together for
AutoTack to starboard
-1 plus -10
Press together for
AutoTack to port
D5449-3
DISP
Press to display data pages
Press for 1 second for lamp
adjust
Press for 3 seconds for
contrast adjust
Press for 9 seconds
(in Standby mode) for
power down
When powered down, press
for 1 second to power up
STANDBY
Press for Standby mode
Press for 2 seconds to enter
Calibration mode
81283_1.book Page 4 Monday, October 2, 2006 2:03 PM

Raymarine SmartPilot Series Specifications

General

Type	Autopilot System
Series	SmartPilot
Manufacturer	Raymarine
Compatibility	Raymarine
Power Supply	12V DC
Rudder Feedback	Yes
Course Computer	Integrated
Interface	NMEA 0183