46 ST1000 Plus & ST2000 Plus Tiller Pilots
Remote control cabling
If required, you can operate the tiller pilot using:
• a full-function ST600R remote control unit (part no: A12016), or
• a SeaTalk hand-held remote control (part no: Z101)
The following illustration shows how to connect a remote control.
D3279-2
Supply (0 V)
Supply (+12 V DC)12 A fuse
Socket
SeaTalk cable
SeaTalk
cable*
Yellow (SeaTalk data)
Screen (SeaTalk 0 V)
Red (SeaTalk 12 V)
with 5 A fuse
SeaTalk
instruments
SeaTalk
socket
Z101 remote
ST600R remote
or
*If you only need to connect a remote, wire
this SeaTalk cable into the tiller pilot socket
81130_5.book Page 46 Wednesday, June 15, 2005 3:48 PM
To Next Page
Loading...
