WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
Tertiary Winding System:
Transformers may have a Primary, Secondary and Tertiary winding. Activate the “Tertiary” option, by
touching the check box.
Buttons appear for the additional winding.
It is also possible to define Tap positions for this
third winding.
When all parameters are complete, press "Go" to create a new Profile.
To generate this transformer as a template press " ->Temp.” For more information about templates, see
"Working with Templates" on page 61.
Press "Go" to view the screen to fill in the data from
the nameplate of the transformer.
The default Name is the date and the time. This can
be edited.
Select the field you would like to change/edit and
use the screen to change the value or connect a
USB Keyboard to the instrument.
Press “Close” after the name is entered.
Select another field to edit/change.
To Next Page
Loading...
