WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
Working with Templates
When testing many of the same transformers, it is possible to create a new transformer Profile as a
Template. Creating a Profile Template allows editing of parameters, Names, s/n etc.
NOTE!
Use this option if you have to measure many transformers of the same type.
To make a Template, review the instructions on making a Profile in “Create a New Profile” on page 57.
However, after all parameters have been entered, press "->Temp" instead of "Go".
After creating a new Profile and pressing “-> Temp,”
rename the template with another name other than
the date and the time which are displayed by default.
Edit any other information (Type, Location, etc.) as
required for the Template.
The new profile will be created with a minimum of
information, and it will be stored in the archive of the
instrument. In the S/N (serial number) field, the name
"Template" will be entered by default.
To Next Page
Loading...
