8 ST60 Tridata Instrument Owner’s Handbook
2. There are four preset contrast settings. Momentarily press the
depth key to cycle through the these settings until you achieve
optimum display quality.
3. Press any other key to leave the contrast-adjust mode.
Note: The display will also return to normal operation 7 seconds after
the last key press.
1.5 Remote control
When it is connected to SeaTalk, the ST60 Tridata instrument can be
controlled remotely with a SeaTalk Remote Keypad Unit. Remote
control of an instrument is indicated by a REMOTE legend on the
display, to indicate that the keypad has control.
Details on how to use the remote control facility can be found in the
SeaTalk Remote Keypad Owner’s Handbook.
040_2c01.p65 09/08/99, 09:318
To Next Page
Loading...
