scrolling through the contacts, the phone will
automatically move back to contacts one (1)
through six (6) after twenty (20) seconds.
The only instances in which the user leaves
the primary screen is when he or she places
or receives a call or if the option to have a
dialer is selected and the user pulls up the
dial pad. When calls are over, the phone will
automatically go back to the primary screen.
In keeping with the philosophy of making the
experience as simple as possible, the screen
does not time out. As long as the phone is
not powered off, the screen will always be
visible.
In case you accidentally exit the RAZ
Memory Cell Phone environment and enter
Safe mode, press the power button and tap
“Restart.” After it restarts, select the RAZ
app as the Home app and tap “Always.” This
will bring you back to the RAZ Memory Cell
Phone environment.
Volume
The volume rocker is disabled; volume is
always set to maximum.
Auto answer
To make the RAZ Memory Cell Phone
automatically answer incoming calls after
10
To Next Page
Loading...
