RBH Access Technologies UNC100 Hardware Manual

UNC100 Hardware Manual V1.4 RBH Access Technologies Inc.
Page 18 of 36
Steps to enable E-net Encryption
To achieve encryption the following steps have to be followed:
In the advanced tab of Network Configurations
of AxiomXA software, select E-Net as Slave
Protocol.
In Master and Slave UNC-100s configuration
enter serial number and IP address of panels.
In the advanced tab of Network Configurations,
check AES option and enter a four character
customer key.

RBH Access Technologies UNC100 Specifications

General

Brand	RBH Access Technologies
Model	UNC100
Category	IP Access Controllers
Language	English