RBH Access Technologies UNC100 - U N C 1 0 0 S P E C I F I C a T I O N

UNC100 Hardware Manual V1.4 RBH Access Technologies Inc.
Page 35 of 36
UNC10 0 S p e c i f i c a t i o n
Controller Power Requirements
12 – 14vdc
Current Consumption
250mA
Processor
32 bit micro controller
Memory
2MB
UNC-NET Connections
15
RC-2 Connections
4 (3 + 1 internal)
IOC-16 connections
16
UNC-NET Communication speed
156250 baud
DNET Communication speed
38400 baud
HOST Ethernet speed
10/100 TCP/IP Ethernet, RS485 4 wire
HOST RS485 Speed
9600, 38400, 57600, 115200 baud
Clock/RAM backup battery
3v Lithium battery CR1632
Real Time Clock
Built-in as standard
Watch Dog Circuit
Built-in as standard
Board Dimensions
H 5 ½ in x W 5 in (14 x 12 ½ cm)
Operating Temperature
0 to 70C (35 - 150F)
Operating Humidity
20 to 85% RH (non-condensing)