RCA VR344 - Frame Advance; Index Search

FRAME ADVANCE
Frame advance lets you view one-stop action frame after
another.
1. Press PAUSE on the remote (PLAY*PAUSE on the VCR) to
“freeze” the action during playback.
2. Press F.ADV each time you want to view a frame of the scene.
3. Press PAUSE or PLAY on the remote (PLAY*PAUSE on the
VCR) to return to normal playback.
INDEX SEARCH
The VCR has a “VHS Index Search System” that automatically
records an index mark on the tape every time you start a
recording. During playback you can locate the program you want
to play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are on the
tape.
To Search:
INDEX SEARCH
PRESS REV OR FWD
TO BEGIN SCANNING
OR
ENTER A SPECIFIC
INDEX NUMBER
--
PRESS SEARCH TO EXIT
1. Press SEARCH on the remote to display the INDEX SEARCH
INDEX SEARCH
menu on the TV screen.
SEARCHING FOR
INDEX NUMBER 12...
2. If you want to search a certain number of index marks, press
I I
two number buttons to enter the number of marks you want
to search. Press CLEAR on the remote to correct an entry.
PRESS STOP TO CANCEL
3. Press FWD to search forward or REV to search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the
next index mark and begin playback.
4. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
l A mark too close to your location on the tape.
l The mark at the beginning of a recorded segment of five
minutes or less.
l The first index mark on the tape when you start at the
beginning of the tape.
INDEX SEARCH
SEARCHING FOR
INDEX MARKS...
PRESS STOP TO CANCEL
33