AUTO PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
l
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
l
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO TV/VCR --MODEL VRS19 ONLY
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned on. Press
3 to switch between ON and OFF.
l
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This only
applies if you connect the ANTENNA IN and OUT jacks of
your VCR and TV and watch your VCR on channel 3 or 4 of
your TV
l
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV’s video input
and you don’t want your antenna/cable signal interrupting
the VCR.
Auto TV/VCR
Pressing WWCR on the remote
will still switch between the VCR
and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
18
To Next Page
Loading...
