9
Setting Up the VCR
Startup
7. Select the language/Seleccione el idioma.
This feature lets you select English or Spanish as the language for
your on-screen menus.
A. Press MENU on remote to see the VCR MAIN MENU.
B. Press 6 to switch between English or Spanish.
• Select LANGUAGE to have the menus displayed in English.
• Select IDIOMA to have the menus displayed in Spanish.
8. Use TV•VCR button.
Skip this step if you used one of the advanced hookups
When using one of the basic hookups, the TV•VCR button lets you
switch between the picture coming from the VCR or television
channels. Also, this button lets you record a program on the VCR
while watching another channel on the TV. Details are on page 17.
A. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
B. Press CHAN up or down to change channels on the VCR.
The channel number changes on the TV screen.
C. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel. Change
channels using the TV’s remote.
D. Return the TV to the VCR viewing channel — CH3 or CH4.
E. Press TV•VCR to switch back to the picture from the VCR.
9. Set the time and date.
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 5 to display SET VCR CLOCK.
The TIMER indicator in the VCR’s display panel flashes if the
clock is not set.
C. Enter the time and date with the number buttons on the remote.
• Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
• Press CLEAR on the remote to change incorrect entries.
D. Press MENU to start the clock and remove SET VCR CLOCK
menu from the screen. The time and date appear on the TV
screen when you press the DISPLAY button.
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
5 SET VCR CLOCK
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
5 SET VCR CLOCK
6 LANGUAGE (IDIOMA)
SET VCR CLOCK
TIME --:--
(HH:MM)
DATE --/--/--
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
VCR MENU PRINCIPAL
1 PROGRAMAR PARA GRAB.
2 REVISAR PROGRAMAS
3 CONFIGURAR CANALES
4 OPCIONES CONFIG. VCR
5 PONER HORA DE LA VCR
6 IDIOMA (LANGUAGE)
0 SALIR
To Next Page
Loading...
