21
Recording a Program
Checking or Clearing Timer Recordings
1. Press MENU on the remote to display the VCR
MAIN MENU on TV screen.
2. Press 2 for REVIEW PROGRAMS.
Each entered program is displayed for a few
seconds in sequence. Press MENU or 2 to display
information at a faster pace.
3. Press CLEAR on remote when the program you
want to erase appears on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
VCR’s AUDIO1 and VIDEO1 IN jacks. Recording from
the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input, press INPUT on the remote to enter
VIDEO IN instead of the channel number on the TV
screen during timer programming.
Stopping a Timer Recording
With the VCR: Press POWER and then STOP•EJECT
within a few seconds.
With the Remote: Press POWER and then STOP
within a few seconds.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
PROGRAM 1 - ONE TIME
CHANNEL 08 CABLE
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 11/17/95 FRI
TAPE SPEED SLP
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG
PROGRAM 1 - ONE TIME
CHANNEL VIDEO IN
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
To Next Page
Loading...
