11
Using the Remote Control
VCR Function Buttons
(continued)
Numbers (0 through 9)
Select a channel up to 99 by pressing
two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1-- appears
on the screen. Then, press the other two
numbers.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent recording
of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns VCR on and off.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select
another. Press PREV CH to switch
between the two channels.
REC (Record)
Starts VCR recording.
Used for Express recording. See page 18.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse motion
during playback.
SEARCH
Displays ZERO SEARCH menu on TV.
Advances the tape 60 seconds during
playback.
SLOW
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
STOP
Stops the normal VCR functions such
as record, playback, rewind, fast
forward, and pause.
TRACKING Up and Down
Lets you manually reduce the streaks
that may appear on the picture during
play or pause.
Reduces picture ‘jitter” during stop
action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR or
the TV channel. See page 9.
To Next Page
Loading...
