Real Flame 700 - APPLIANCE DATA AND DIMENSIONS; Model Specifications; Inlet Pressure & Cut-out Dimensions

4 | P a g e
DATA PLATE (Affixed to the base of the unit for reference to gas pressure & consumption)
Inspire 700
GAS TYPE
INJECTOR SIZE
TPP
N.G.C. (MJ/hr)
Natural Gas
1 X 2.30mm
0.88kPa High
0.40kPaLow
22.0 High/16.0 Low
LPG
1 X 1.35mm
2.48kPa High
1.58kPaLow
22.0 High/17.0 Low
Inspire 900
GAS TYPE
INJECTOR SIZE
TPP
N.G.C. (MJ/hr)
Natural Gas
1 X 2.45mm
0.89kPa high
0.42kPa Low
24.0 High/16.0 Low
LPG
1 X 1.45mm
2.49kPa High
1.58kPaLow
24.0 High/19.0 Low
Inspire 1100
GAS TYPE
INJECTOR SIZE
TPP
N.G.C. (MJ/hr)
Natural Gas
1 X 2.65mm
0.88kPa High
0.41kPaLow
29.0 High/20.0 Low
LPG
1 X 1.50mm
2.45kPa High
1.51kPaLow
27.0 High/21.0 Low
Max - Min inlet pressure range
Natural gas: 1.13kPa - 5.00 kPa
LPG: 2.75kPa - 5.00 kPa
Note: Gas pressures are not adjustable on the Inspire models.
DIMENSIONS
Gas and electrical connection cut-out dimensions for all models