Real Flame 700 - REMOTE CONTROL FUNCTIONS; Temperature Display Settings; Appliance On;Off Control; Flame Level Adjustment

37 | P a g e
REMOTE CONTROL OPERATION
Note
• Not all remote control functions are available.
• In the event of loss of power, the appliance will shut down safely. The appliance may automatically
resume operation once power is restored, pending the operation mode of the remote control.
Transmitter LCD display
TECHNICAL DATA
Remote Control
Supply Voltage
4.5V (three 1.5 V AAA batteries) Ambient
Temperature settings
0 - 50°C
Radio frequency
315 MHz
WARNING
THE TRANSMITTER AND RECEIVER ARE RADIO FREQUENCY DEVICES. PLACING THE RECEIVER IN OR NEAR
METAL MAY SEVERELY REDUCE THE SIGNAL RANGE.
ATTENTION:
• TURN OFF THE MAIN GAS SUPPLY OF THE APPLIANCE DURING INSTALLATION OR MAINTENANCE OF THE
RECEIVER DEVICE.
• TURN OFF MAIN GAS SUPPLY TO THE APPLIANCE PRIOR TO REMOVING OR REINSERTING THE
BATTERIES.
• IN CASE OF REMOTE CONTROL MALFUNCTION TURN OFF THE IFC DEVICE USING THE ON/OFF SWITCH.
• FOR INSTALLATION/MAINTENANCE SWITCH OFF THE IFC DEVICE REMOVING MAIN POWER SUPPLY
PLUG.