Control module STM 22 RED/DUO 6
B6_Control_SYS20_EN_V1.3.doc Art. Nr. 102-020401135 31 / 36
6.2. Applications
The control module STM 22 RED/DUO will be – depending on the implemented software and cor-
responding admissions – used for the following installations.
6.2.1. Escape and rescue routes as RED installation
The STM 22 RED/DUO control module with RED Software complies with EN
13849-1:2006, Category 3 PLd.
6.2.2. Heavy door leafs as DUO installation
The STM 22 RED/DUO control module with RED Software complies with EN
13849-1:2006, Category 2 PLc.
The STM 22 RED/DUO is usually delivered with RED soft ware!
For applications as DUO drive (heavy doors) the corresponding DUO software
on CPU1 and CPU2 need to be installed!
FPC menu Flash-programmer update manual (both CPU’s!)
6.3. Type plate STM 22 RED/DUO
STM 22 RED/DUO
ATTENTION
NOTE
NOTE