15
User Manual
4. Attach the heater securely to the wall using the suction
cup provided.
5. Thread the heater cord through the channel to the other end
of the tank, threading it through the innermost of the three
channels and out the other end through the cord access hole.
Cable channel cover
With the three cables from the circulation pumps and heater held
in place in the cable channel, snap close the cable channel cover.
Protein skimmer
Figure 10: Installing the channel cover
Figure 11: Protein skimmer parts
Collection cup cover
Collection cup adjuster
O-ring
Collection cup
Skimmer body
Inlet pump
Pump
To Next Page
