22
!! Switch off the tractor’s engine and PTO before descending !!
!! Make sure that the tractor and the machine cannot move uncontrolled !!
1. Loosen the nuts (1) of the protective covers (2) and remove them.
2. Move the pins to the required configuration.
3. Store the removed pins very securely.
4. Return the protective covers (2) and tighten the nuts (1).
11. OPTIONS
11.1. Angled knives
The standard construction of the machine includes slightly angled knives.
If required, the machine can also be constructed to include perpendicular knives (optional). These
knives are slightly less bent than the standard knives. This ensures a less tossing treatment of the
underground.
See the components booklet fro more information.
Fig. 11
To Next Page
Loading...
