Regin Corrigo E series - Chapter 2 About Corrigo E

Corrigo E Heating manual, revision G Chapter 2 About Corrigo E 5
Chapter 2 About Corrigo E
Corrigo E for heating is a complete new range of programmable controllers for control of building
heating systems.
Corrigo E series for heating comprises three model sizes: 8, 15 or 28 in-/outputs.
Available with or without front panel display and buttons. For units without front panel display and
buttons a separate, cable-connected terminal E-DSP with display and buttons is available.
All programming and normal handling can be done using the display and buttons or from a
connected computer running Corrigo E-tool.
The temperature controllers are PI-controllers for heating control and tap hot-water control with a
pre-programmed set of control modes. To the controllers can be bound a number of different control
functions and analogue and digital input and output functions. The choice of which functions are to
be used is free, the only restriction lying in the physical number of inputs and outputs that the
different models have.
The Corrigo is designed for DIN-rail mounting.
The program for a heating unit contains, apart from other things, the following functions:
Heating sequence control:
Control of 1 - 3 individual heating circuits.
Tap hot water control:
1 or 2 tap hot water circuits and 1 storage-tank charger circuit.
Differential pressure control
One constant differential pressure control circuit
Boiler control
Basic two step boiler control.
Timer outputs
Up to 5 individually settable timer outputs for control of, for example, lighting, door locks etc.
Timer control
Year-base clock, individual schedulers, holiday scheduler.
Water consumption
Energy consumption