Regin Corrigo U10 Series User Manual

26
Manual CORRIGO U-SERIE 2002-09
Factory settings U20
Configuration Factory setting
Config.code 1 1100.1110.0000
Config.code 2 0000.0111.11
A AI1 = Outdoor temperature
B AI2 = HS1 Outgoing water temperature
C AI3 = Not used
D AI4 = Not used
E AI5 = HW Outgoing water temperature
F AI6 = THW Outgoing water temperature
G AI7 = HS2 Outgoing water temperature
H AI8 = Not used
I HS1 No night setback
J HS1 No room compensation
K HS1-CV1 type 0-10V
L HS1-CV2 not used
M HS2 No night setback
N HS2 No room compensation
O HS2-CV2 type 0-10V
P HS2-CV2 not used
Q THW 1 sequence
R Control HW activated
S Pump control HS1 active
T Pump control HS2 active
U Pump monitor HWC-P active
V Daylight saving time active
Factory settings U10
Configuration Factory setting
Config.code 1 1100.1100.0000
Config.code 2 0000.0110.11
A AI1 = Outdoor temperature
B AI2 = HS1 Outgoing water temperature
C AI3 = Not used
D AI4 = Not used
E AI5 = HW Outgoing water temperature
F AI6 = THW Outgoing water temperature
G AI7 = Not used in Corrigo U10
H AI8 = Not used in Corrigo U10
I HS1 No night setback
J HS1 No room compensation
K HS1-CV1 type 0-10V
L Not used in Corrigo U10
M Not used in Corrigo U10
N Not used in Corrigo U10
O Not used in Corrigo U10
P Not used in Corrigo U10
Q THW 1 sequence
R Control HW activated
S Pump control HS1 active
T Not used in Corrigo U10
U Pump monitor HWC-P active
V Daylight saving time active

Regin Corrigo U10 Series Specifications

General

Brand	Regin
Model	Corrigo U10 Series
Category	Controller
Language	English