43
9. Acceptance / service report
Template for photocopying
REHAU-VACUCLEAN central vacuum cleaner system
Acceptance report
Service report
1. System details
Name of operator:
Street address:
Town/city/postcode:
Central vacuum cleaner type: 2000 3000 4000
Serial number:
System installed on:
2. System check and servicing
Check-list for central vacuum cleaner system
Check main switch for proper working order
Check proper functioning of system with remote control
➜ Unplug the central vacuum cleaner unit at the mains plug before carrying out the following work.
Check and service the carbon brushes on vacuum cleaner motor
Check and clean cartridge filter
Check and, if necessary, empty the waste collector
Check-list for suction sockets
Check that suction sockets are free from residue
Check that suction socket covers close completely
Check-list for suction hose
Check that suction hose is not cracked
3. Deficiencies established and rectified:
Servicing conducted on:
Company stamp / customer service signature
Warning!
Risk of death!
Energised unit parts can cause death and
severe burns via electric shock.
➜ Switch off the central vacuum unit and
pull the mains plug before performing
maintenance.
➜ Only clean central vacuum unit with a
dry cloth.
➜ When conducting servicing work, observe the instructions given in the latest Technical
Information, the regulations for the prevention of accidents, VDE provisions, the provisions
issued by the employers' liability insurance association and the national regulations.
➜ Check system in accordance with check-lists below.
➜ Rectify any deficiencies established and record in Section 3.
➜ Tick inspection box after completing inspection step if system is found to be in proper
working order.
To Next Page
Loading...
