Rehau VACUCLEAN 2000 - Method of Operation; Motor and Performance

8
1.2
Method of operation
Working with the suction hose
Fig. 1-2: Connecting suction hose
➜ Attach hose with telescopic tube and
nozzle to the suction socket (see Fig. 1-2).
➜ Switch on central vacuum unit with the
"ON" button of the radio sender unit.
➜ After vacuuming, switch off central
vacuum unit with the "OFF" button of the
radio sender unit.
➜ Do not switch on the central vacuum
unit until the suction hose is connected
to the suction socket or the wall
vacuum connection Vac-Pan is open.
➜ Switch off the central vacuum unit
before the suction hose is removed
from the suction socket or the wall
vacuum connection Vac-Pan is closed.
For safety reasons, the central vacuum
unit switches off automatically after
15 minutes of operation.
➜ Switch on the central vacuum unit
again with the "ON" button of the radio
sender unit.
Working with the wall vacuum
connection Vac-Pan
Fig. 1-3: Wall vacuum connection
Vac-Pan
➜ Open Vac-Pan.
➜ Switch on central vacuum unit with the
"ON" button of the radio sender unit.
➜ Sweep waste to be sucked up into the
Vac-Pan.
➜ Switch off central vacuum unit with the
"OFF" button of the radio sender unit.
➜ Close Vac-Pan.
1.3
Motor and performance
High air watt capacity at high efficiency is a
deciding factor for the suction performance
at the nozzle of the REHAU-VACUCLEAN
central vacuum cleaner system.
The motors of the central vacuum unit from
REHAU offer the best output and advantages
in comparison to many of our competitors:
Air data for REHAU vacuum units in comparison to our competitors
Fig. 1-4: Air data for REHAU vacuum units in comparison to our competitors
REHAU
Competitors
η Efficiency
Volumetric flow
➜ Do not switch on the vacuum unit if the
wall vacuum connection Vac-Pan is
closed.
➜ If the central vacuum unit is not
connected at the lowest point of the
system, wait approx. 10 seconds after
vacuuming for the vacuumed debris to
be fully sucked up.
+ High-quality ball bearings
+ Automatic switch-off carbon brushes
+ High endurance
+ Electronic soft start-up
+ Thermal cut-outs prevent overheating
+ Long service life
+ Millions in use today
V