REI TALAN 3.0 User Manual

5
Revision 3.01
© COPYRIGHT RESEARCH ELECTRONICS INTERNATIONAL
REI products are designed and intended for legal commercial applications, however because
laws and regulations vary from state to state and country to country, it is the sole responsibility
of the purchaser and user/operator to check and comply with all applicable laws and
regulations for the possession and operation of this equipment before and after making a
purchase.
This manual contains proprietary information intended solely for use with the TALAN
Telephone and Line Analyzer.
Information contained in this manual including product operation and specifications is subject
to change without notice.
Any product or brand names contained in this manual are used only for identification purposes
and are trademarks or registered trademarks of their respective holders.
NOTE: The overall effectiveness of any technical surveillance countermeasure is directly
dependent on the level of threat and the user’s ability to properly deploy the appropriate
countermeasure. REI’s Center for Technical Security offers training on technical surveillance
countermeasure equipment.
OWNER’S RECORD
The Serial Number of each TALAN is located on the underside of the unit. Please record this
number and refer to it whenever you contact your dealer or Research Electronics International
concerning this product. Note: Removal or alteration of the serial number automatically voids
all warranties of this product.
MODEL: TALAN
SERIAL NUMBER: __________________
Research Electronics International, LLC
455 Security Drive, Cookeville, TN 38506 U.S.A.
(800) 824-3190 (US Only) • +1 931-537-6032
www.reiusa.net
© Copyright Research Electronics International LLC

REI TALAN 3.0 Specifications

Control System

primary computer	32 bit RISC processor, 520 MHz
internal memory	64 MB SDRAM (OS), 64 MB Flash
external memory	Compact Flash Type III, USB mass storage

Digital Multimeter

sample rate	500 msec
AC/DC volts	0 to 250V Maximum
AC/DC current	0 to 300mA Maximum
resistance	0 to 42MΩ
capacitance	50pF to 40µF

Power System

external input	15VDC @3A
universal power supply	100-240VAC, 50-60Hz
removable battery	Rechargeable Lithium ion, 4-hour runtime

Mechanical

dimensions	10.0 in x 12.9 in x 2.7 in (25.4 cm x 32.8 cm x 6.9 cm)
weight with battery	6 lbs (2.7 kg)
case dimensions	5.4 in x 14.9 in x 19.5 in (13.7 cm x 37.8 cm x 49.5 cm)
loaded case weight	19.0 lbs (7.1 kg)
operating temperature	0°C to +50°C

Harmonic Locator Probe

operational frequency	225 kHz & 450 kHz
antenna type	Balanced Loopstick
headphone audio output	16Ω, 105dB SPL limited
battery	9V Alkaline
run-time	10 hours average, 22 hours (headphones)
size	17.5 in x 1.5 in (44.45 cm x 3.8 cm) stored, 63.75 in x 1.5 in (162 cm x 3.8 cm) fully extended
weight	1 lbs (.5 kg)